SRS SOLE-sole replaceable system, compatible with E1 sole (enduro sole) and with SMS sole (for Supermoto)
Anatomically shaped PU shin plate
Micro adjustable and replaceable buckle system
Upper Velcro closure
3 hyper extension systems (in the front, in the back and under the ankle)
PU bootleg on the back
Inner PU bootleg
Elastic gaiter
Toe entirely wrapped in plastic protection with geometric design
Replaceable metatarsus protection
Anatomically shaped PU heel
Sizes 40 – 47
Follow the procedure below to ensure that you choose the right size.
MEASURE YOUR FOOT BY FOLLOWING THESE STEPS: :
- Put a sheet of paper on the floor with the short side against the wall.
- Put the sole of your bare foot on it with the heel pressing against the wall
- Mark the point in front of the tip of your longest toe on the sheet of paper.
- Measure the distance between the margin of the sheet of paper where you placed your heel and the point where you made the mark. Always round up the measurement to the next millimetre.
You may find that your right and left foot are different lengths. Always measure both of them and use the longest measurement as your reference.
If you are undecided between two sizes after consulting the table, we recommend that you opt for the larger size.
| CM | EUR | US | US W | UK |
|---|---|---|---|---|
| 21,8 | 35 | 3,1 | 4,6 | 2,6 |
| 22,5 | 36 | 3,9 | 5,4 | 3,4 |
| 23,2 | 37 | 4,7 | 6,2 | 4,2 |
| 23,8 | 38 | 5,5 | 7,0 | 5 |
| 24,5 | 39 | 6,2 | 7,7 | 5,7 |
| 25,2 | 40 | 7 | 8,5 | 6,5 |
| 25,8 | 41 | 7,8 | 9,3 | 7,3 |
| 26,5 | 42 | 8,6 | 10,1 | 8,1 |
| 27,2 | 43 | 9,4 | 10,9 | 8,9 |
| 27,8 | 44 | 10,2 | 9,7 | |
| 28,5 | 45 | 11 | 10,5 | |
| 29,2 | 46 | 11,7 | 11,2 | |
| 29,8 | 47 | 12,5 | 12 | |
| 30,5 | 48 | 13,3 | 12,8 | |
| 31,2 | 49 | 14,1 | 13,6 | |
| 31,8 | 50 | 14,9 | 14,4 | |
| 32,5 | 51 | 15,7 | 15,2 |
USD : 97.69
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
